/* Part of SWI-Prolog
Author: Jan Wielemaker
E-mail: J.Wielemaker@vu.nl
WWW: http://www.swi-prolog.org
Copyright (c) 1998-2015, University of Amsterdam
VU University Amsterdam
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
:- module(prolog_edit,
[ edit/1, % +Spec
edit/0
]).
:- autoload(library(lists),[member/2,append/3,nth1/3]).
:- autoload(library(make),[make/0]).
:- autoload(library(pce),[in_pce_thread/1]).
:- autoload(library(pce_emacs),[emacs/1]).
:- autoload(library(prolog_breakpoints),[breakpoint_property/2]).
:- set_prolog_flag(generate_debug_info, false).
/** <module> Editor interface
This module implements the generic editor interface. It consists of two
extensible parts with little in between. The first part deals with
translating the input into source-location, and the second with starting
an editor.
*/
:- multifile
locate/3, % +Partial, -FullSpec, -Location
locate/2, % +FullSpec, -Location
select_location/3, % +Pairs, +Spec, -Location
edit_source/1, % +Location
edit_command/2, % +Editor, -Command
load/0. % provides load-hooks
%! edit(+Spec)
%
% Edit indicated object.
edit(Spec) :-
notrace(edit_no_trace(Spec)).
edit_no_trace(Spec) :-
var(Spec),
!,
throw(error(instantiation_error, _)).
edit_no_trace(Spec) :-
load_extensions,
findall(Location-FullSpec,
locate(Spec, FullSpec, Location),
Pairs0),
merge_locations(Pairs0, Pairs),
do_select_location(Pairs, Spec, Location),
do_edit_source(Location).
%! edit
%
% Edit associated or script file. This is the Prolog file opened
% by double-clicking or the file loaded using
%
% ==
% % swipl [-s] file.pl
% ==
edit :-
current_prolog_flag(associated_file, File),
!,
edit(file(File)).
edit :-
'$cmd_option_val'(script_file, OsFiles),
OsFiles = [OsFile],
!,
prolog_to_os_filename(File, OsFile),
edit(file(File)).
edit :-
throw(error(context_error(edit, no_default_file), _)).
/*******************************
* LOCATE *
*******************************/
%! locate(+Spec, -FullSpec, -Location)
locate(FileSpec:Line, file(Path, line(Line)), [file(Path), line(Line)]) :-
integer(Line), Line >= 1,
ground(FileSpec), % so specific; do not try alts
!,
locate(FileSpec, _, [file(Path)]).
locate(FileSpec:Line:LinePos,
file(Path, line(Line), linepos(LinePos)),
[file(Path), line(Line), linepos(LinePos)]) :-
integer(Line), Line >= 1,
integer(LinePos), LinePos >= 1,
ground(FileSpec), % so specific; do not try alts
!,
locate(FileSpec, _, [file(Path)]).
locate(Path, file(Path), [file(Path)]) :-
atom(Path),
exists_file(Path),
\+ exists_directory(Path).
locate(Pattern, file(Path), [file(Path)]) :-
atom(Pattern),
catch(expand_file_name(Pattern, Files), _, fail),
member(Path, Files),
exists_file(Path),
\+ exists_directory(Path).
locate(FileBase, file(File), [file(File)]) :-
atom(FileBase),
absolute_file_name(FileBase,
[ file_type(prolog),
access(read),
file_errors(fail)
],
File),
\+ exists_directory(File).
locate(FileSpec, file(File), [file(File)]) :-
catch(absolute_file_name(FileSpec,
[ file_type(prolog),
access(read),
file_errors(fail)
],
File),
_, fail).
locate(FileBase, source_file(Path), [file(Path)]) :-
atom(FileBase),
source_file(Path),
file_base_name(Path, File),
( File == FileBase
-> true
; file_name_extension(FileBase, _, File)
).
locate(FileBase, include_file(Path), [file(Path)]) :-
atom(FileBase),
setof(Path, include_file(Path), Paths),
member(Path, Paths),
file_base_name(Path, File),
( File == FileBase
-> true
; file_name_extension(FileBase, _, File)
).
locate(Name, FullSpec, Location) :-
atom(Name),
locate(Name/_, FullSpec, Location).
locate(Name/Arity, Module:Name/Arity, Location) :-
locate(Module:Name/Arity, Location).
locate(Name//DCGArity, FullSpec, Location) :-
( integer(DCGArity)
-> Arity is DCGArity+2,
locate(Name/Arity, FullSpec, Location)
; locate(Name/_, FullSpec, Location) % demand arity >= 2
).
locate(Name/Arity, library(File), [file(PlPath)]) :-
atom(Name),
'$in_library'(Name, Arity, Path),
( absolute_file_name(library(.),
[ file_type(directory),
solutions(all)
],
Dir),
atom_concat(Dir, File0, Path),
atom_concat(/, File, File0)
-> absolute_file_name(Path,
[ file_type(prolog),
access(read),
file_errors(fail)
],
PlPath)
; fail
).
locate(Module:Name, Module:Name/Arity, Location) :-
locate(Module:Name/Arity, Location).
locate(Module:Head, Module:Name/Arity, Location) :-
callable(Head),
\+ ( Head = (PName/_),
atom(PName)
),
functor(Head, Name, Arity),
locate(Module:Name/Arity, Location).
locate(Spec, module(Spec), Location) :-
locate(module(Spec), Location).
locate(Spec, Spec, Location) :-
locate(Spec, Location).
include_file(Path) :-
source_file_property(Path, included_in(_,_)).
%! locate(+Spec, -Location)
%
% Locate object from the specified location.
locate(file(File, line(Line)), [file(File), line(Line)]).
locate(file(File), [file(File)]).
locate(Module:Name/Arity, [file(File), line(Line)]) :-
( atom(Name), integer(Arity)
-> functor(Head, Name, Arity)
; Head = _ % leave unbound
),
( ( var(Module)
; var(Name)
)
-> NonImport = true
; NonImport = false
),
current_predicate(Name, Module:Head),
\+ ( NonImport == true,
Module \== system,
predicate_property(Module:Head, imported_from(_))
),
functor(Head, Name, Arity), % bind arity
predicate_property(Module:Head, file(File)),
predicate_property(Module:Head, line_count(Line)).
locate(module(Module), [file(Path)|Rest]) :-
atom(Module),
module_property(Module, file(Path)),
( module_property(Module, line_count(Line))
-> Rest = [line(Line)]
; Rest = []
).
locate(breakpoint(Id), Location) :-
integer(Id),
breakpoint_property(Id, clause(Ref)),
( breakpoint_property(Id, file(File)),
breakpoint_property(Id, line_count(Line))
-> Location = [file(File),line(Line)]
; locate(clause(Ref), Location)
).
locate(clause(Ref), [file(File), line(Line)]) :-
clause_property(Ref, file(File)),
clause_property(Ref, line_count(Line)).
locate(clause(Ref, _PC), [file(File), line(Line)]) :- % TBD: use clause
clause_property(Ref, file(File)),
clause_property(Ref, line_count(Line)).
/*******************************
* EDIT *
*******************************/
%! do_edit_source(+Location)
%
% Actually call the editor to edit Location, a list of Name(Value)
% that contains file(File) and may contain line(Line). First the
% multifile hook edit_source/1 is called. If this fails the system
% checks for XPCE and the prolog-flag editor. If the latter is
% built_in or pce_emacs, it will start PceEmacs.
%
% Finally, it will get the editor to use from the prolog-flag
% editor and use edit_command/2 to determine how this editor
% should be called.
do_edit_source(Location) :- % hook
edit_source(Location),
!.
do_edit_source(Location) :- % PceEmacs
current_prolog_flag(editor, Editor),
pceemacs(Editor),
current_prolog_flag(gui, true),
!,
memberchk(file(File), Location),
( memberchk(line(Line), Location)
-> ( memberchk(linepos(LinePos), Location)
-> Pos = (File:Line:LinePos)
; Pos = (File:Line)
)
; Pos = File
),
in_pce_thread(emacs(Pos)).
do_edit_source(Location) :- % External editor
external_edit_command(Location, Command),
print_message(informational, edit(waiting_for_editor)),
( catch(shell(Command), E,
(print_message(warning, E),
fail))
-> print_message(informational, edit(make)),
make
; print_message(informational, edit(canceled))
).
external_edit_command(Location, Command) :-
memberchk(file(File), Location),
memberchk(line(Line), Location),
editor(Editor),
file_base_name(Editor, EditorFile),
file_name_extension(Base, _, EditorFile),
edit_command(Base, Cmd),
prolog_to_os_filename(File, OsFile),
atom_codes(Cmd, S0),
substitute('%e', Editor, S0, S1),
substitute('%f', OsFile, S1, S2),
substitute('%d', Line, S2, S),
!,
atom_codes(Command, S).
external_edit_command(Location, Command) :-
memberchk(file(File), Location),
editor(Editor),
file_base_name(Editor, EditorFile),
file_name_extension(Base, _, EditorFile),
edit_command(Base, Cmd),
prolog_to_os_filename(File, OsFile),
atom_codes(Cmd, S0),
substitute('%e', Editor, S0, S1),
substitute('%f', OsFile, S1, S),
\+ substitute('%d', 1, S, _),
!,
atom_codes(Command, S).
external_edit_command(Location, Command) :-
memberchk(file(File), Location),
editor(Editor),
atomic_list_concat(['"', Editor, '" "', File, '"'], Command).
pceemacs(pce_emacs).
pceemacs(built_in).
%! editor(-Editor)
%
% Determine the external editor to run.
editor(Editor) :- % $EDITOR
current_prolog_flag(editor, Editor),
( sub_atom(Editor, 0, _, _, $)
-> sub_atom(Editor, 1, _, 0, Var),
catch(getenv(Var, Editor), _, fail), !
; Editor == default
-> catch(getenv('EDITOR', Editor), _, fail), !
; \+ pceemacs(Editor)
-> !
).
editor(Editor) :- % User defaults
getenv('EDITOR', Editor),
!.
editor(vi) :- % Platform defaults
current_prolog_flag(unix, true),
!.
editor(notepad) :-
current_prolog_flag(windows, true),
!.
editor(_) :- % No luck
throw(error(existence_error(editor), _)).
%! edit_command(+Editor, -Command)
%
% This predicate should specify the shell-command called to invoke
% the user's editor. The following substitutions will be made:
%
% | %e | Path name of the editor |
% | %f | Path name of the file to be edited |
% | %d | Line number of the target |
edit_command(vi, '%e +%d \'%f\'').
edit_command(vi, '%e \'%f\'').
edit_command(emacs, '%e +%d \'%f\'').
edit_command(emacs, '%e \'%f\'').
edit_command(notepad, '"%e" "%f"').
edit_command(wordpad, '"%e" "%f"').
edit_command(uedit32, '%e "%f/%d/0"'). % ultraedit (www.ultraedit.com)
edit_command(jedit, '%e -wait \'%f\' +line:%d').
edit_command(jedit, '%e -wait \'%f\'').
edit_command(edit, '%e %f:%d'). % PceEmacs client script
edit_command(edit, '%e %f').
edit_command(emacsclient, Command) :- edit_command(emacs, Command).
edit_command(vim, Command) :- edit_command(vi, Command).
edit_command(nvim, Command) :- edit_command(vi, Command).
substitute(FromAtom, ToAtom, Old, New) :-
atom_codes(FromAtom, From),
( atom(ToAtom)
-> atom_codes(ToAtom, To)
; number_codes(ToAtom, To)
),
append(Pre, S0, Old),
append(From, Post, S0) ->
append(Pre, To, S1),
append(S1, Post, New),
!.
substitute(_, _, Old, Old).
/*******************************
* SELECT *
*******************************/
merge_locations(Pairs0, Pairs) :-
keysort(Pairs0, Pairs1),
merge_locations2(Pairs1, Pairs).
merge_locations2([], []).
merge_locations2([H0|T0], [H|T]) :-
remove_same_location(H0, H, T0, T1),
merge_locations2(T1, T).
remove_same_location(Pair0, H, [Pair1|T0], L) :-
merge_locations(Pair0, Pair1, Pair2),
!,
remove_same_location(Pair2, H, T0, L).
remove_same_location(H, H, L, L).
merge_locations(Loc1-Spec1, Loc2-Spec2, Loc-Spec) :-
same_location(Loc1, Loc2, Loc),
!,
( merge_specs(Spec1, Spec2, Spec)
; merge_specs(Spec2, Spec1, Spec)
; Spec = Spec1
),
!.
merge_locations([file(X)]-_, Loc-Spec, Loc-Spec) :-
memberchk(file(X), Loc),
memberchk(line(_), Loc).
same_location(L, L, L).
same_location([file(F1)], [file(F2)], [file(F)]) :-
best_same_file(F1, F2, F).
same_location([file(F1),line(L)], [file(F2)], [file(F),line(L)]) :-
best_same_file(F1, F2, F).
same_location([file(F1)], [file(F2),line(L)], [file(F),line(L)]) :-
best_same_file(F1, F2, F).
best_same_file(F1, F2, F) :-
catch(same_file(F1, F2), _, fail),
!,
atom_length(F1, L1),
atom_length(F2, L2),
( L1 < L2
-> F = F1
; F = F2
).
merge_specs(source_file(Path), _, source_file(Path)).
%! select_location(+Pairs, +UserSpec, -Location)
do_select_location(Pairs, Spec, Location) :-
select_location(Pairs, Spec, Location), % HOOK
!,
Location \== [].
do_select_location([], Spec, _) :-
!,
print_message(warning, edit(not_found(Spec))),
fail.
do_select_location([Location-_Spec], _, Location) :- !.
do_select_location(Pairs, _, Location) :-
print_message(help, edit(select)),
list_pairs(Pairs, 0, N),
print_message(help, edit(prompt_select)),
read_number(N, I),
nth1(I, Pairs, Location-_Spec),
!.
list_pairs([], N, N).
list_pairs([H|T], N0, N) :-
NN is N0 + 1,
list_pair(H, NN),
list_pairs(T, NN, N).
list_pair(Pair, N) :-
print_message(help, edit(target(Pair, N))).
read_number(Max, X) :-
Max < 10,
!,
get_single_char(C),
put_code(user_error, C),
between(0'0, 0'9, C),
X is C - 0'0.
read_number(_, X) :-
read_line(Chars),
name(X, Chars),
integer(X).
read_line(Chars) :-
get0(user_input, C0),
read_line(C0, Chars).
read_line(10, []) :- !.
read_line(-1, []) :- !.
read_line(C, [C|T]) :-
get0(user_input, C1),
read_line(C1, T).
/*******************************
* MESSAGES *
*******************************/
:- multifile
prolog:message/3.
prolog:message(edit(not_found(Spec))) -->
[ 'Cannot find anything to edit from "~p"'-[Spec] ],
( { atom(Spec) }
-> [ nl, ' Use edit(file(~q)) to create a new file'-[Spec] ]
; []
).
prolog:message(edit(select)) -->
[ 'Please select item to edit:', nl, nl ].
prolog:message(edit(prompt_select)) -->
[ nl, 'Your choice? ', flush ].
prolog:message(edit(target(Location-Spec, N))) -->
[ '~t~d~3| '-[N]],
edit_specifier(Spec),
[ '~t~32|' ],
edit_location(Location).
prolog:message(edit(waiting_for_editor)) -->
[ 'Waiting for editor ... ', flush ].
prolog:message(edit(make)) -->
[ 'Running make to reload modified files' ].
prolog:message(edit(canceled)) -->
[ 'Editor returned failure; skipped make/0 to reload files' ].
edit_specifier(Module:Name/Arity) -->
!,
[ '~w:~w/~w'-[Module, Name, Arity] ].
edit_specifier(file(_Path)) -->
!,
[ '<file>' ].
edit_specifier(source_file(_Path)) -->
!,
[ '<loaded file>' ].
edit_specifier(include_file(_Path)) -->
!,
[ '<included file>' ].
edit_specifier(Term) -->
[ '~p'-[Term] ].
edit_location(Location) -->
{ memberchk(file(File), Location),
memberchk(line(Line), Location),
short_filename(File, Spec)
},
!,
[ '~q:~d'-[Spec, Line] ].
edit_location(Location) -->
{ memberchk(file(File), Location),
short_filename(File, Spec)
},
!,
[ '~q'-[Spec] ].
short_filename(Path, Spec) :-
absolute_file_name('', Here),
atom_concat(Here, Local0, Path),
!,
remove_leading_slash(Local0, Spec).
short_filename(Path, Spec) :-
findall(LenAlias, aliased_path(Path, LenAlias), Keyed),
keysort(Keyed, [_-Spec|_]).
short_filename(Path, Path).
aliased_path(Path, Len-Spec) :-
setof(Alias, file_alias_path(Alias), Aliases),
member(Alias, Aliases),
Alias \== autoload, % confusing and covered by something else
Term =.. [Alias, '.'],
absolute_file_name(Term,
[ file_type(directory),
file_errors(fail),
solutions(all)
], Prefix),
atom_concat(Prefix, Local0, Path),
remove_leading_slash(Local0, Local),
atom_length(Local, Len),
Spec =.. [Alias, Local].
file_alias_path(Alias) :-
user:file_search_path(Alias, _).
remove_leading_slash(Path, Local) :-
atom_concat(/, Local, Path),
!.
remove_leading_slash(Path, Path).
/*******************************
* LOAD EXTENSIONS *
*******************************/
load_extensions :-
load,
fail.
load_extensions.
:- load_extensions.